Nowadays, one of the best ways to secure your home is by installing a smart door lock. An innovative device like this will definitely give you peace of mind. If you don’t have such a clever device, you can find the best smart door locks on smartlock.reviews, where each smart lock is analyzed in detail and compared with other locks in its price range. If you have already bought one but you have no idea how to install it, then take a look at the following simple steps for installing a smart door lock.
First of all, remove your old deadbolt
You obviously cannot do anything until you remove the old deadbolt. Therefore, remove it. For this sort of job, it is recommended to use a screwdriver, or a drill.
Next, you need to install a new latch
After you have remove the old deadbolt, it is now time to select that latch that fits the hole diameter. In oredr to do this, you must measure the hole diameter. Then you need to place the latch, and adjust its length in order to fit very well the hole. You must keep in mind to secure the latch with screws, after you have slide it into the door.
Install your smart door lock
You ned to measure your door, in order to see how thick it is. Once you have the answer, you will know exactly what screws to use. Then, you must position the device on the door, and slide the deadbolt stem through the interior of the latch. Once you have done this, you need to slide the wires of the unit under the latch. While you do this, keep in mind to press the deadbolt against the door. On the interior of the door, you will need to place the bracket, and then slide the wires through them. At the end, secure bracket extremely well, by using the provided bolts.
Don’t forget to install the interior panel as well
Before you actually install the interior panel, you must plug the cables from your device, into the right electrical components. Once you have done this, you must tuck them into the piece, and obviously secure the piece with the provided screws. Keep in mind to double check your deadbolt, and see exactly if it is working properly.
Program your smart door lock
After you have followed all the above steps, you will need to program your device. You must download the specific app, and make an account. Then, you must open the app, and calibrate your phone and your deadbolt as well, and you will be ready to use the clever unit. All these simple steps for installing a smart door lock will definitely help you obtain the desired result with ease.