DIY automotive stamping: A basic explanation

Automotive metal stamping is typical technology in the automotive industry. As a matter of fact, the stamping of metal has long been an accepted method of creating intricate designs. Complex precision metalworking is used for the fabrication of components like brakes, automotive sensors, fuel delivery system, airbag components and lighting system. Deep drawn stampings are durable and they are the best solutions for simple shapes. Should you be using deep drawn stamping? If you have a basement workshop, you should definitely give metalworking a try. You should become accustomed to doing these things on your own. If you want to learn how to make cool deep drawn stampings, read this.

Benefits of metal stamping

The deep drawn metal stamping process gives automotive parts many benefits. The main benefit is that you can create a number of parts in a short period of time, which in turn increases your production speed, especially if you are doing things by hand. The metal forming process is associated with lower costs of raw material, so you will be able to save money. The overall cost of your part is significantly reduced. Another benefit brought about by metal stamping is waste minimization. You will be using the minimum amount of metal for the automotive parts. The most important benefit brought about by metalworking is accuracy. Hard tooling die designs are all about productivity and precision. If you are working on your next automotive part, this is the best process.

How to metal stamp car parts

The process is not nearly as complicated as you may think. All you have to do basically is to press a piece of wet clay and form it into the shape you want. In deep drawn stamping, the metal blank is pressed down into a series of dies, but since you do not have a specialized press, you are going to have to work with what you got. Follow these steps:

  1. Make a template out of sheet metal.
  2. Cut out the template on a saw and create the shape for the die.
  3. Use a plate of steel as a foundation for the male section of the die. To keep the pieces of the die assembly in place, use pins.
  4. Set the die and the sheet metal into the press and introduce the female plate.
  5. Fit in place 2 more steel plates.
  6. After the ram compresses the assembly, remove the stamped piece.

No success with deep drawn metal stamping?

As simple as it may seem, deep drawn metal stamping is not a stress-free process. This is the reason why you may or may not be successful when making stamps for automotive parts. The great news though is that you can have manufacturing done for you. Get in touch with a company that specializes in metal forming. Specialist sin deep draw technologies are capable of producing precise metal components and they serve many industries. The point is that if the result if not the one you expected hire a company of this kind.